Luoyang Ruichuang Electrical Equipment Co., Ltd. manufactures this Portable Laser Welder as a compact, air-cooled handheld fiber laser welding system for on-site and workshop use. It has 800W, 1200W and 1500W options, and welds metal sheets from 0.5mm to 4mm thickness at 0.5-2 m/min. It runs on ordinary single phase 220V 50Hz electricity and does not need a separate water chiller or complicated installation, making it useful for sheet metal shops, enclosure makers and small batch bespoke fabricators.


Hand-held fiber laser welder is a high-energy-density beam welding machine with fiber laser source for welding of metals. Operators may operate on massive structures, unusual forms and hard-to-reach joints right on the manufacturing floor or on a job site in this portable configuration, unlike stationary robotic welding cells.
It has a lower learning curve than TIG or MIG welding. The wobbling head interface is less sensitive to hand movement, therefore most operators may produce consistent, professional results within 1-2 days of practice. The heat-affected zone (HAZ) is also less than with traditional arc welding, which decreases workpiece deformation and the quantity of post-weld grinding needed.
1064nm-1080nm. The photoelectric conversion efficiency of fiber laser source is more than 30%. The welding speed is much quicker than the traditional arc techniques, but the real benefits depend on the kind of material, the joint arrangement and the operator's expertise.
| Model | RC-LW-30D | RC-LW-40D |
| Power | 800W | 1200W |
| Handheld welding gun tip | GW | |
| Operating Mode | Continuous Mode/Pulse Mode | Continuous Mode/Pulse Mode |
| Output Laser Wavelength | 1080±10nm | 1080±10nm |
| Input Voltage | 220VAC/50Hz/60Hz | 220VAC/50Hz/60Hz |
| Welding Shielding Gas | Inert gases (nitrogen, argon) | Inert gases (nitrogen, argon) |
| Cooling method | Water cooling | |
| Product Dimensions/Weight | 250×579×479mm(L×W×H)/26kg | 250×579×479mm(L×W×H)/30kg |
| Welding Capacity | ||||||
| Power | Welding Material | Steel Stainless | Carbon steel | aluminum | Brass | Red copper |
| 800W | Single-sided penetration | 3mm | 3mm | 3mm | 3mm | 0.8mm |
| 1200W | Single-sided penetration | 4mm | 4mm | 4mm | 3.5mm | 1mm |
Core Advantages of This Air-Cooled Design
No External Chiller Required
The integrated air-cooling system replaces the water chiller used in many laser-welding installations. This decreases the total equipment footprint, eliminating the need for water lines and coolant management, and simplifies day-to-day maintenance.
Lightweight and compact
The weight of the hand held torch is 0.8kg ~ 1.5kg. Operators may move it from workstation to workstation or straight to a project location without having to break down the device. This is important in workplaces with different kinds of products or uneven assembly sites.
Easy setup
Just plug it into a regular 220V outlet and start welding. The system requires no pre-run cooling, no complex calibration procedure and no long warm-up time, making it perfect for both everyday production runs and unexpected maintenance work.
Accessible Entry Point for Fiber Laser Welding
For small and mid-sized manufacturers looking to move away from MIG or TIG welding, this machine of Portable Laser Welder provides access to fiber laser speed and precision without the capital outlay of a full robotic welding cell.
It welds the most prevalent materials in sheet metal fabrication, enclosure manufacture and bespoke metalwork: carbon steel, stainless steel, galvanized steel, aluminum alloy and copper alloy.
Sheet Metal Fabrication: It may be used to stainless steel cookware, electrical cabinets, elevator panels, which need good appearance of welds and surface quality.
On-Site Structural Repair: The portability enables for welding in tight locations or on huge assemblies where permanent equipment cannot be located.
Custom and small-batch production: The machine can be readily reconfigured with little effort to accommodate varied joint types and materials, making it ideal for workshops with ever-changing product mixtures or small order numbers.

The machine is equipped with laser safety eyewear, safety trigger that only activates when the nozzle touches the workpiece, protective nozzle cover and emergency stop button to avoid unintentional laser emission. All applicable local laser safety standards should be followed by the operators of this device.
Argon is the most often used shielding gas and works with most metals. Nitrogen, however, is usually advised for stainless steel to aid the surface polish and corrosion resistance.
The protective lens should be inspected daily and replaced every 2–4 weeks depending on workload and operating conditions. The cooling system benefits from periodic maintenance every 3–6 months. The built-in heat dissipation structure is designed to support continuous daily operation in intermittent and medium-volume production environments.

Q:What is the main benefit of the air-cooled design?
A:No external water chiller is required. The integrated cooling system keeps the unit compact and reduces the infrastructure needed to operate it.
Q:Which metals does this machine weld?
A:It welds carbon steel, stainless steel, aluminum alloy, galvanized sheet, and copper alloy — the common materials used in sheet metal and enclosure production.
Q:What is the welding thickness range?
A:The machine is designed for thin to medium sheet metal, with a rated range of 0.5mm to 4mm. Actual performance depends on material type, power setting, and joint configuration.
Q:Can it run continuously throughout a shift?
A:The built-in heat dissipation structure supports continuous daily use in intermittent and medium-volume production. Performance in high-duty-cycle environments should be confirmed based on your specific production schedule.
Q:What safety equipment is included?
A:The machine comes with laser safety goggles, a contact-activated safety trigger, a protective nozzle cover, and an emergency stop button.
Q:How long does it take to train an operator?
A:Most operators reach consistent welding results after 1–2 days of practice. The wobble head interface reduces the precision demand on hand movement compared to TIG welding.
For product inquiries or pricing, reach our team at sales@lyrcautomation.com. We're glad to help you identify the right configuration for your application with Portable Laser Welder.
