Luoyang Ruichuang Electrical Equipment Co., Ltd. (est. 2002) manufactures the RC-D-7-2-J/G Foam Sealing Machine, a CNC-controlled dispensing system built on FIPFG (Form-In-Place Foam Gasket) technology. The machine deposits PU two-component foam directly onto components to make waterproof, dustproof and airtight seals without hand bonding or pre-cut strips. It has a working surface of 2450 × 1250 × 330 mm and is CE and ISO9001 certified. It is meant to deal with electrical cabinets, EV battery packs, automotive parts and industrial enclosures.

FIPFG = Form-In-Place Foam GasketThe resin and the hardener are mixed in a mixing head. The mixture reacts and expands instantly on the substrate surface creating a seamless three-dimensional elastic seal that is free of seams, manual bonding and pre-cut strips.
For large scale production runs, sealing costs per unit are cheaper with the FIPFG process than with conventional pre-cut EPDM gaskets, since it eliminates the cutting waste and reduces the number of human handling steps each production cycle.
| Machine Model | Working area (X*Y*Z) | Glue Output | Strip width | Strip height | Cleaning method | Application |
| RC-D-7-2-J/G | 2450*1250*330(mm) Three-axes linkage; Customized working area is available |
0.5-5.5g/s | 4-30mm | 2-10mm | High pressure multi-point water flush | Cabinets; lighting; automotive; electronics; communication &explosion-proof products and etc. |
Heavy-duty cantilever frame with large stroke
The extended working area of 2450 × 1250 × 330 mm accommodates oversized cabinet doors and battery pack covers without repositioning, reducing handling time between cycles.
Super Mixing Head RC-7B with one-click width switching
Gasket width adjusts between 4–30 mm through a single-click command. No manual parts replacement is required, which shortens changeover time when running different product types on the same line.
Non-power cleaning system
The cleaning cycle is carried out without electrical power consumption during purging, therefore decreasing operating expenses and wear on mixing head components over the long term.
Optional plasma work station
A plasma surface treatment station may be added before the dispensing phase to increase adhesion on low surface energy substrates such as PP, ABS, aluminium and stainless steel.
Secondary adhesive feed system
The secondary supply system ensures a consistent material pressure throughout continuous production without pressure dips which might influence the bead geometry uniformity over lengthy sealing pathways.
Electrical enclosures, control panels
The machine is used to seal switchgear doors, server racks and distribution boxes up to IP65–IP68. The foam maintains the dimensional constraints needed for big cabinet doors and has a uniform bead profile.
Automotive and EV Battery Pack
The machine applies PU foam gaskets that act as both moisture barriers and vibration dampening for battery housing assemblies where the geometry of the joint sealing has to be constant from unit to unit.
Outdoor & Industrial Lightings
For outdoor LED streetlights and explosion-proof housings, the FIPFG technique creates a continuous seal around unusual housing features, such as curved or stepped flange geometries.
Communication equipment housings
Telecom enclosures and roadside cabinets require repeatable sealing geometry across production batches. CNC-controlled path programming of Foam Sealing Machine keeps bead width and height consistent from unit to unit.

Each gasket produced by this system can be verified through multiple checkpoints:
The mixing head uses automated cleaning cycles — high-pressure water or eco-friendly solvent — to prevent material buildup between batches.
The RC-D-7-2-J/G can be configured to match specific production requirements:
Luoyang Ruichuang's engineering team supports configuration from initial design through installation, commissioning, and operator training.

Q:What is the product?
A:The product is equipment that automatically dispenses foam sealing material onto components to create waterproof, dustproof, and airtight seals. The RC-D-7-2-B/G uses FIPFG technology with PU two-component foam.
Q:How does FIPFG differ from traditional foam gasket installation?
A:Traditional foam strips need human cutting, placement and glueing. FIPFG creates the gasket directly on the product in a single automated process, improving sealing uniformity and lowering labour for each cycle.
Q:This machine can seal what sort of parts?
A: Typical uses include electrical enclosure doors, control cabinet frames, EV battery pack coverings, communication equipment housings and industrial lighting fixtures.
Q: What repeatability does the machine offer?
A: The RC-D-7-2-J/G has a repeatable precision of ±0.05 mm for consistent bead width and height from batch to batch.
Q:Can the machine be customized for different part sizes?
A: Yeah. Based on your part sizes and production volume, we may specify the working area, dispensing parameters, fixture design, and amount of automation.
Q:What IP ratings can the sealed parts achieve?
A:The system is designed to support sealing to IP65–IP68 levels, subject to part design, substrate preparation, and foam material selection.
Interested in the RC-D-7-2-J/G or want to discuss your sealing application for Foam Sealing Machine? Contact our team at sales@lyrcautomation.com — we're ready to help you find the right configuration.