For manufacturers working with curved surfaces, unusual geometries or multi-angle bonding, typical 3-axis CNC equipment generally can't properly finish the task. Luoyang Ruichuang's Robotic Dispensing Machine RC-G-1680/AB fills this gap, using a 6-axis industrial robot combined with a specific glue delivery system. It handles silicone, epoxy resin, PU glue and other adhesives over complicated 3D routes, accommodating single-component (1K) and dual-component (2K) compositions on a single programmable platform.

A conventional 3-axis CNC dispensing machine performs well on flat, uniformly shaped parts. Once the workpiece has tilted faces, compound curves, or bonding zones at multiple angles, a fixed-gantry system reaches its mechanical limits.
The RC-G-1680/AB uses a 6-axis articulated arm that moves through all orientations — including inverted and oblique angles. It can trace dispensing paths that a gantry-based machine physically cannot follow.
The technology enables trajectory dispensing, spray dispensing and fill dispensing modes. The robot is completely programmable, so there is no need for a fixturing rebuild or full cell reprogramming when moving over to a new product.
| Parameter | Details |
|---|---|
| Model | RC-G-1680/AB |
| Robot Type | 6-Axis Industrial Robot |
| Working Stroke | Configured to workpiece dimensions |
| Glue System | Dedicated dispensing control and glue supply system |
| Glue Type | 1K (single-component) / 2K (dual-component) |
| Processing Materials | Silicone, Epoxy Resin, PU Glue, Adhesives and Sealants |
| Dispensing Mode | Trajectory dispensing, spraying, filling |
| Control System | Multi-axis robotic motion control with handheld controller |
| Surface Compatibility | Flat, 3D curved, and irregular-shape workpieces |
| Positioning Accuracy | Consistent repeat positioning via multi-axis motion control |
| Application Scope | Electronics, automotive parts, new energy, household appliances |
The glue supply system is designed to maintain stable output pressure throughout the dispensing cycle, keeping bead width and glue volume consistent across production runs. Compatible materials include:
The system covers a broad viscosity range, from low-viscosity sealants to heavier structural adhesives, without requiring a separate platform for each material type.

New Energy Vehicles and EV Batteries
Battery pack assembly involves thermal interface material and potting compound application on curved module surfaces. The 6-axis arm reaches every bonding zone directly, without repositioning the part between passes.
Electronics and PCBA
Edge bonding and underfill work on circuit boards requires controlled path following. Consistent repeat positioning reduces material waste and limits the need for rework.
Automotive Components and Lighting
Lamp housings, plastic trim pieces and curved metal panels all have non-planar sealing surfaces. The robot dispenses homogenous glue beads along programd 3D routes independent of the angle of the surface.
Industrial equipment and household appliances
Typical application areas include sheet metal enclosures, plastic housings and mixed-material assemblies. Once each software is saved a single system may execute different sorts of product.

The RC-G-1680/AB of Robotic Dispensing Machine is built to operate inside a larger automated cell rather than as a standalone station. It can be connected to:
This allows manufacturers to build a continuous dispensing process — from part feeding through glue application to inspection — without manual handling between steps.

Luoyang Ruichuang has been inventing and manufacturing industrial automation equipment since 2002. We do in-house mechanical engineering, electrical systems and software development, which makes it easier to coordinate throughout the life of the project.
For each system, Ruichuang provides design, manufacture, on-site installation, commissioning, operator training and after-sales maintenance. The firm also has its own Automation Training Center providing training courses on PLC programming and industrial robot operation.
Modular glue supply design and programmable control system provide the equipment the ability to be altered as production needs grow, without replacing the main machine.
Q: What is the product?
A: It is an automated system including an industrial robot and a precision dispensing device. The robot deposits adhesive, sealant or other fluid ingredients along programd lines at a regulated volume and speed – a repeatable, quantifiable procedure that replaces variable hand glueing.
Q:Which product types are suitable for this system?
A:The RC-G-1680/AB works well for automotive components, EV battery packs, electrical enclosures, electronic assemblies, and metal or plastic housings — particularly parts with complex geometry or high-volume throughput requirements.
Q:How is dispensing accuracy determined?
A:Robot model, dispensing valve type, substance viscosity and route complexity have an influence on repeat placement accuracy. To provide constant bead width from cycle to cycle, multi-axis motion control and stable-pressure glue supply are used. Please contact Ruichuang with specifics of your workpiece for accuracy estimates for your particular application.
Q:Can this equipment be put into an existing manufacturing line?
A: Yes. It is integrated with conveyor systems, loading and unloading units, vision inspection equipment and positioning fixtures to create a full automated dispensing cell.
Q: How does this differ from a CNC dispensing machine?
A:Suitable for flat or standard profile working surfaces of the CNC dispensing machine. The 6-axis robot system gives a broader work range, access to 3D surfaces from several angles, better product versatility and easier integration into automated lines, all benefits that are important for complicated workpiece geometries or various product mixes.
Q:Does the machine support both 1K and 2K adhesive systems?
A:Yes. The RC-G-1680/AB handles both single-component and dual-component formulations, covering the majority of industrial adhesive and sealant applications.
Send your workpiece details and production requirements to sales@lyrcautomation.com. Ruichuang's engineering team will review your application for Robotic Dispensing Machine and follow up directly.
