Silicone Gasket Dispensing Machines

Silicone Gasket Dispensing Machines

Silicone Dispensing Machine for explosion-proof products Sealing I RC-D-7-2-W/SI

Travel: 1200 × 600 × 200 (mm)
900 Series bus control system + Panasonic servo motor
Follower plate pump + screw pump
Applications: new energy industry, explosion-proof electrical equipment, outdoor LED lighting, high-speed rail, marine instrumentation, medical devices, and home appliances.
Product Description

Silicone Gasket Dispensing Machines for Industrial Sealing — Precision Automated Solutions by Luoyang Ruichuang

Luoyang Ruichuang's RC-D-7-2-W/SI Silicone Gasket Dispensing Machines automates Form-in-Place and Cure-in-Place gasket production with ±0.01 mm motion repeatability and dispensing speeds up to 500 mm/s. It is built for manufacturers that require reliable IP68+ sealing on high-volume lines, replacing manual and die-cut techniques, cutting per-unit production costs by 30-50%, and needing just one operator. It powers anything from EV battery packs to explosion-proof enclosures and is designed to last 15+ years.

Silicone Gasket Dispensing Machines

What Is the Silicone Gasket Dispensing Machines?

For use with Form-in-Place Gasket (FIPG) and Cure-in-Place Gasket (CIPG), this item is a CNC-controlled system. It uses a programd path to apply liquid silicone rubber (LSR) or RTV silicone to the surface of a part. The silicone then dries in place to make a lasting seal that is fully integrated.

This method is based on G-code lines from CAD, which are different from normal die-cut seals that can't handle odd 3D shapes and lose up to 40% of the material. In the end, there is a tight seal that is resistant to air, water, and dust that meets strict industrial tolerances every time.

Key Technical Specifications

Machine Model Working area  (X*Y*Z) Glue Output Strip width Strip height Cleaning method Application
RC-D-7-2-W/Si 1200×600×200(mm
Three-axes linkage;
Customized working area is available
0.2-6.0g/s 3.5-15mm 2.5-7mm High pressure multi-point water flush Power battery PACK box, controller housing, lamps, instruments, car door panels, audio, etc.

Silicone Gasket Dispensing Machines


Why the Pump System Matters: Constant Pressure, Zero Voids

The RC-D-7-2-W/SI is a screw and follower plate pump combination. The follower plate pump keeps the material feed pressure on the drum constant, and the screw pump exactly sets the volumetric output for a wide range of silicone viscosities, from seals that flow to pastes with a high thixotropy.

With this two-stage design, there aren't any changes in pressure that could cause the bead to break, air to get trapped, or the lengths to be uneven.The result is an unbroken, bubble-free silicone gasket with a homogeneous cross-section throughout the duration of the manufacturing run.

Verified output quality includes:

  • Bead width consistency: within ±0.1 mm across a full cycle
  • No observable voids on cross-section inspection
  • Stable output maintained without operator adjustment during extended runs

Core Performance Advantages

✦ Sealing Performance That Meets Certification Standards

Finished gaskets are IP68+ immersion protected, UL94-V0 flame retardant and have operational stability from -65℃ to 250℃. They pass pressure decay tests, 500-hour salt spray tests and UV/ozone exposure procedures – satisfying the certification criteria of automotive, energy and safety equipment industries.

✦ 30%–50% Lower Production Cost vs. Manual Methods

Automated path dispensing eliminates material overapplication and reduces labor dependency to a single operator per line. Material utilization improves by up to 30% compared to die-cutting, where offcut waste is unavoidable.

✦ One-Click Program Switching for Mixed Production

The 900 Series bus control system stores multiple gasket profiles. Switching between product variants — different bead paths, gasket sizes, or silicone specifications — takes seconds, not hours. This makes the machine practical for facilities running five or more product lines on a single machine.

✦ 15+ Year Service Life with Minimal Downtime

Silicone Gasket Dispensing Machines are specified with Panasonic servo motors and reinforced guide rails for continuous duty cycle applications. Service life is rated at over 15 years. Modular design enables for component repair without a complete line stoppage.

Application Industries

Industry Sealing Requirement
New Energy & EV IP68 battery enclosure sealing, thermal cycling from -65℃ to 250℃
Explosion-Proof Equipment High-integrity sealing for hazardous-location enclosures
Outdoor LED Lighting UV-stable, long-term waterproof protection
High-Speed Rail & Marine Vibration-resistant continuous seals under environmental stress
Medical Devices Contamination-free application with food-grade/medical-grade silicone
Automotive Electronics ECU housings, sensor enclosures, connector sealing
Home Appliances Consistent sealing for high-volume consumer product lines

All of the applications mentioned need seals that have passed standardised IP immersion, pressure decay, or salt spray testing. The gaskets generated by this technology are designed and implemented to fulfil those standards.

Silicone Gasket Machines application

Quality Control: What You Can Measure and Verify

The equipment offers real-time dispensing monitoring that monitors the bead profile according to programd parameters during manufacturing. Variations generate notifications before bad parts reach the production line.

Post-production verification checklist:

  • Bead geometry: Width, height, and path continuity measured against CAD tolerances
  • Shore A hardness: Confirms full cure and material consistency
  • Cure-through volume: Cross-section sampling verifies no undercured core material
  • IP immersion test: Finished assemblies tested to IEC 60529 IP68 protocol

This process reduces outgoing defect rates compared to manual application methods, where bead consistency depends entirely on operator skill and fatigue level.

Customization Options

The RC-D-7-2-W/SI is configurable at the point of order. Standard customization options include:

  • Working area dimensions: Adjusted to your component size and fixture layout
  • Fixture and tooling design: Matched to your part geometry for repeatable positioning
  • Dispensing system configuration: Valve type, nozzle diameter, and flow rate tuned to your silicone formula
  • Silicone material: Industrial waterproof, fireproof, food-grade, or medical-grade formulations supported
  • Software and I/O integration: Compatible with existing line control systems and MES interfaces

> Have a non-standard part geometry or a mixed production requirement?

> Contact our engineering team for a custom configuration review →

About Luoyang Ruichuang

Luoyang Ruichuang Electrical Equipment Co., Ltd. has operated since 2002, accumulating over 20 years of engineering experience across CNC automation, industrial robotics, and electrical equipment manufacturing.

What this means for buyers:

  • In-house mechanical, electrical, and software engineering — no third-party integration risk
  • Dedicated after-sales team supporting installation, commissioning, and long-term maintenance
  • On-site Automation Training Center providing PLC programming and robot operation training for your operators
  • ISO-compliant manufacturing processes with documented quality control at each production stage

Luoyang Ruichuang machines are now working at EV manufacturing factories, explosion-proof equipment and outdoor lighting assembly plants in a number of countries.

Gasket Dispensing Machines

FAQ

Q:What makes the gaskets produced by this machine different from die-cut silicone gaskets?

A:Die-cut gaskets are stamped from flat sheet stock — they cannot conform to 3D surface profiles and produce significant material offcut waste. FIPG/CIPG gaskets dispensed by this machine are applied directly to the component surface, following any 3D geometry precisely. There is no offcut waste, and the seal is bonded to the substrate, which improves leak resistance under vibration and thermal cycling.

Q:Can the machine handle high-viscosity silicone pastes?

A:Yes. The screw pump is rated for a wide viscosity range. For high-thixotropy materials, the follower plate pump maintains consistent feed pressure to prevent starved flow conditions. Specific viscosity range compatibility can be confirmed during the configuration review process.

Q:Is food-grade or medical-grade silicone supported?

A:Yes. The dispensing system can be specified with food-grade or medical-grade silicone formulas. Material contact surfaces are selected accordingly. Please specify your material requirement at inquiry.

Q:What is the changeover time between different gasket programs?

A:Program switching via the 900 Series control system is one-click. Physical tooling changeover time depends on fixture design, but the software transition itself adds no production downtime.

Q:What after-sales support is included?

A:Installation and commissioning support, operator training through the in-house Automation Training Center, and a dedicated after-sales service team for the full equipment lifecycle. Remote diagnostics support is also available.

Q:What certifications do the finished gaskets meet?

A:Gaskets produced by this system are formulated and applied to meet IP68 (IEC 60529), UL94-V0 flame retardancy, and customer-specified pressure decay and salt spray standards. Certification of finished products depends on the customer's assembly and testing process.

Contact Us

Get specifications, request a custom configuration review, or ask a technical question for Silicone Gasket Dispensing Machines.

Email: sales@lyrcautomation.com — we respond within 1 business day.